Hard disk drives or HDDs are a type of data storage. Its technology is based on electromagnetism and it is designed to store data. A hard disk drive is nonvolatile and retains data even while turned off. Data is accessed in a random access manner meaning that data can be retrieved non sequentially in any order.
History
Hard disk drives were invented by IBM in 1954. The work was done by a team led by Rey Johnson and the HDDs hit the market in 1956. They immediately became the dominant storage option for computers until SSDs showed up.
The major manufacturers of Hard disk drives are Seagate, Toshiba, and Western Digital.
Key specs
- Form factor: The two main form factors for HDDs are 3.5″ (desktops) and 2.5″ for laptops.
- Storage capacity
- Connections: PATA, SATA, USB or SCSI
- Speed: HDD speed is measured in RPMs or Revolutions Per Minute. Faster is always better.
Read: Smartphone storage types: An overview
Parts of a Hard Disk Drive
- Actuator: They move the read-write arm.
- Actuator Read-Write Arm: moves the read-write heads
- Read-Write head: A tiny magnet that reads and writes data
- Platter: A magnetic plate that stores information
- Control spindle: rotates the platter
- Actuator spindle: rotates the platter
- Connection to PC
- Circuit board with controller for data control (read, write, and access)
- Flexible connector: moves data to and fro from circuit board to plaster and back
How HDDs work
Hard disk drives store data using magnetism. The data is stored on the platter, divided into billions of tiny areas. Each one of these areas can be magnetized (1) or demagnetized (0) to store data.
Reading-Writing data
There are 2 read-write heads per platter, one to read and the other to write data. To read, the actuator moves the actuator arm over the platter so that the read head can read the data stored on it.
To write data, the actuator arm moves the write head to empty sections of the platter where it can magnetize areas into 1s and 0s (110010011). This action is how data is saved (written) to a Hard Drive.
For a computer to locate files or write to an HDD, a full file map of the HDD is saved to the circuit board. This file map is called a File Allocation Table (FAT) on Windows. This file map is managed by a controller.
The controller on the motherboard serves as an interface that allows computers to access, read, and modify data on an HDD.
Benefits of using a HDD
- Affordable/cost-effective
- High capacity storage
- Long life span
Drawbacks
- Disk crash
- High power consumption
- Bulky
- Slow
- Reliability
Please leave a comment if you have any difficulty and remember to:
- Subscribe to our YouTube channel
- Follow on Facebook
- Join our Telegram community
- Participate on Reddit
- Find us on Quora
- Follow us on Instagram
- Check out the Clubhouse as well